English
Current position： Home > Product > Supply voltage > Voltage regulator
Brief introduction:SBW-YS series printing equipment special voltage regulator is based on years of experience in designing and manufacturing voltage regulators, according to the different needs of users in the printing industry for electricity safety, customized for users in this industry for a series of industry-specific voltage regulators. The special voltage regulator for printing equipment has the characteristics of anti-high-frequency interference, anti-electromagnetic and anti-surge performance, high voltage
SBW-YS series printing equipment special voltage regulator is based on years of experience in designing and manufacturing voltage regulators, according to the different needs of users in the printing industry for electricity safety, customized for users in this industry for a series of industry-specific voltage regulators. The special voltage regulator for printing equipment has the characteristics of anti-high-frequency interference, anti-electromagnetic and anti-surge performance, high voltage regulation accuracy, fast response speed, strong resistance to load impact, and continuous cyclical operation, and has perfect protection functions. SBW-YS series printing equipment special voltage regulator is a personalized product tailored for industry users, mainly used for all kinds of imported precision printing machinery and equipment, and used in all printing places where the power supply conditions cannot meet the requirements. The special voltage regulator for SBW-YS series printing equipment should be used indoors, and the normal use conditions are: 1. Ambient temperature: -10°C—+40°C 2. Altitude: <1000M 3. Relative humidity: 20%-90% 4. There are no gases, vapors, chemical deposits, dust, dirt and other explosive and corrosive media that seriously affect the insulation of the voltage regulator. 5. There is no serious vibration or bump in the installation site.
Basic indicators | Protection function | ||
Input voltage | 380V± 20% or wide voltage is specially defined | Overpressurized | If the output exceeds the rated voltage by 10% (adjustable), the output power supply will be cut off with a delay of 3-5 seconds |
Output voltage | 380V ±5% can be selected | Underpressure | If the output exceeds the rated voltage by -15% (adjustable), the delay will be 3-5 seconds to cut off the output power |
Voltage regulation accuracy | 1-5% can be set | Time delay | Cut off the output power supply for 2 seconds |
frequency | 50Hz/60Hz | Short circuit | When the load equipment is short-circuited, cut off the output power supply |
Response time | ≤0.05s | Passing through | When the rated output current is exceeded, the output power supply is cut off with a delay of 3-5 seconds |
Stabilization time | When the input voltage changes by 10% relative to the rated value, the stability time ≤ 1s | Reverse phase | When there is an error in the three-phase electrical sequence, the machine alarms and cuts off the output power supply (configurable) |
Lack of phase | When the three-phase power is out of phase, the machine alarms and cuts off the output power | ||
Bypass | When the voltage regulator fails or is repaired, it has a manual or automatic pass-through device for power supply | ||
Other indicators | |||
Additional waveform distortion | ≤0.1% | Pressure resistance | The whole machine has no breakdown and no flying arc phenomenon at 2000VAC/min to the ground |
Noise | ＜55dB | Insulation resistance | The whole machine has a ground ≥ of 2MΩ |
efficiency | More than 95% for less than 50KVA, more than 98% for more than 100KVA | EM filtering device | Effectively filters out harmonic interference from the grid (optional configuration) |
Relative humidity | 20%-90% | Lightning protection device | When the power grid changes instantaneously and induces lightning strikes, it can play a role in inrush current protection (optional configuration) |
Working methods | It can work continuously unattended for a long time | monitoring interface | With R232 and RS485 interfaces, remote control, remote signal, and telemetry functions (optional configuration) |
| Specification model | Capacity (KVA) | Current (A) | Dimensions W x D x H (mm) | Weight (KG) | |
| Three phases | SBW-YS-15 | 15 | 23 | 750*550*1250 | 210 |
| SBW-YS-20 | 20 | 31 | 750*550*1250 | 210 | |
| SBW-YS-30 | 30 | 46 | 750*550*1250 | 220 | |
| SBW-YS-50 | 50 | 76 | 750*550*1250 | 250 | |
| SBW-YS-80 | 80 | 121 | 850*600*1500 | 340 | |
| SBW-YS-100 | 100 | 152 | 850*600*1500 | 360 | |
| SBW-YS-150 | 150 | 227 | 950*700*1700 | 500 | |
| SBW-YS-180 | 180 | 274 | 950*700*1700 | 520 | |
| SBW-YS-225 | 225 | 342 | 950*700*1700 | 570 | |
| SBW-YS-320 | 320 | 487 | 1200*850*2150 | 880 | |
| SBW-YS-400 | 400 | 608 | 1200*850*2150 | 1100 | |
| SBW-YS-500 | 500 | 761 | 1200*850*2150 | 1350 | |
| Single phase | DBW-YS-10 | 10 | 45 | 550*600*1150 | 150 |
| DBW-YS-20 | 20 | 90 | 550*600*1150 | 175 | |
| DBW-YS-30 | 30 | 136 | 550*600*1380 | 220 | |
| DBW-YS-50 | 50 | 227 | 650*900*1500 | 290 | |
| DBW-YS-80 | 80 | 363 | 710*920*1620 | 370 | |
| DBW-YS-100 | 100 | 455 | 710*920*1620 | ||
Website QR code
Hotline：
+86 13311837513
No. 1599 Pingzhuang West Road, Fengxian District, Shanghai 
info@cguowen.com 
English 